{"product_id":"surron-brake-pads-copper-sintered-talaria-x3-eride-pro","title":"Surron Brake Pads Copper Sintered | Talaria X3, Eride Pro","description":"\u003cp\u003eThese Surron brake pads are a copper sintered upgrade for the stock MTB-size calipers on the Surron Light Bee, Talaria X3, MX3, MX4, and Eride Pro. In lab testing they held 0.49 to 0.57 friction at 350°C, where stock OEM pads drop about 20%. One set per order covers one caliper.\u003c\/p\u003e\n\n\u003ch2\u003eSpecs:\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCopper sintered compound - built for the heat of hard, repeated braking.\u003c\/li\u003e\n  \u003cli\u003e0.49 to 0.57 friction at 350°C vs 0.35 to 0.50 for stock OEM - bite holds steady from 100°C to 350°C instead of fading.\u003c\/li\u003e\n  \u003cli\u003e6.12 MPa bond strength vs about 4.5 MPa stock, 35% stronger - the pad material stays bonded under heat.\u003c\/li\u003e\n  \u003cli\u003e0.12 to 0.35 wear rate, lower than stock - more miles between pad swaps.\u003c\/li\u003e\n  \u003cli\u003e40 to 50 HRR hardness - tuned to be easy on rotors.\u003c\/li\u003e\n  \u003cli\u003e4.50 g\/cm³ density vs 3.5 to 4.3 stock - more thermal mass to soak up heat.\u003c\/li\u003e\n  \u003cli\u003eStock MTB-size caliper fitment - a drop-in replacement for the OEM pads.\u003c\/li\u003e\n  \u003cli\u003e1 set per order - covers one caliper. Order 2 for front and rear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFits these models:\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSurron Light Bee (\u003cstrong\u003estock brakes, all years\u003c\/strong\u003e; Light Bee X and S, also sold as Segway X160 \/ X260)\u003c\/li\u003e\n  \u003cli\u003eTalaria X3 (\u003cstrong\u003estock brakes\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eTalaria MX3 (\u003cstrong\u003estock brakes\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eTalaria MX4 (\u003cstrong\u003estock brakes\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eEride Pro S (\u003cstrong\u003estock brakes\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eEride Pro SS 2.0 (\u003cstrong\u003estock brakes\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eSuper73 (\u003cstrong\u003ewith MTB-size calipers\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\"Stock brakes\" means the factory MTB-size caliper. The same pads fit any bike running an MTB-size brake caliper.\u003c\/p\u003e\n\u003cp\u003eDoes NOT fit: Surron LB2, Surron Ultra Bee, Eride Pro SS 3.0, Eride Pro SS 4.0, Eride Pro SR, Talaria MX5, Moto Brake calipers\u003c\/p\u003e\n\u003cp\u003eRunning a Moto Brake kit or an Ultra Bee? You need the \u003ca href=\"\/products\/surron-ultra-bee-brake-pads-performance\"\u003eSurron Ultra Bee Brake Pads and Moto Brake Pads\u003c\/a\u003e. Eride Pro SR, SS 3.0, and Talaria MX5 riders: get the \u003ca href=\"\/products\/eride-pro-sr-3-0-talaria-mx5-brake-pads\"\u003eEride Pro SR \/ 3.0 Brake Pads\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eSurron Brake Pads FAQ\u003c\/h2\u003e\n\u003ch3\u003eDo I need these or the Moto Brake pads?\u003c\/h3\u003e\n\u003cp\u003eCheck your caliper. If your bike still runs the factory MTB-size caliper, these are the pads. If you installed a Moto Brake kit or ride an Ultra Bee, get the Moto Brake pads linked above.\u003c\/p\u003e\n\u003ch3\u003eWill they fit my Talaria X3?\u003c\/h3\u003e\n\u003cp\u003eYes. They fit the stock caliper on the Talaria X3, plus the MX3 and MX4. Pick your bike from the options and one set covers one caliper.\u003c\/p\u003e\n\u003ch3\u003eDo they fit the Surron LB2 or the Ultra Bee?\u003c\/h3\u003e\n\u003cp\u003eNo. The LB2 is a new frame and a new design, not a Light Bee, and it uses different brakes. The Ultra Bee runs a larger caliper that takes the Moto Brake pads.\u003c\/p\u003e\n\u003ch3\u003eHow many pads come in an order?\u003c\/h3\u003e\n\u003cp\u003eOne set per order, which covers one caliper. Doing front and rear? Order 2 sets.\u003c\/p\u003e\n\u003ch3\u003eHow do they compare to stock pads?\u003c\/h3\u003e\n\u003cp\u003eIn lab testing they kept their bite at 350°C, where stock pads lose about 20% of theirs. The bond is 35% stronger and they wear slower, so they last longer under stunt and enduro riding.\u003c\/p\u003e\n\n\u003ch2\u003eInstall Guide:\u003c\/h2\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dCcPPAMdFy4\" title=\"Surron brake pads install video\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/install-how-to-install-brake-pads\"\u003eView the Full Step-by-Step Install Guide and Tool List\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShips from USA!\u003c\/strong\u003e\u003c\/p\u003e","brand":"FactoryZ","offers":[{"title":"Surron Light Bee","offer_id":54005981282593,"sku":"MTB-BRAKE-PADS","price":11.29,"currency_code":"USD","in_stock":true},{"title":"Eride Pro S \/ SS 2.0","offer_id":54005981315361,"sku":"MTB-BRAKE-PADS","price":11.29,"currency_code":"USD","in_stock":true},{"title":"Talaria X3 \/ MX3 \/ MX4","offer_id":54005981348129,"sku":"MTB-BRAKE-PADS","price":11.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/6664\/7585\/files\/1-set-brake-pads-surron-light-bee-talaria-eride-pro.webp?v=1792695071","url":"https:\/\/powercurvecycles.com\/products\/surron-brake-pads-copper-sintered-talaria-x3-eride-pro","provider":"Power Curve Cycles","version":"1.0","type":"link"}